The Tray

This week saw us pair into groups to make tray. The aim was to make a tray that was identical to your partners. I paired with Eoin Campbell.

The Process:

Step 1: This was the beginning of our design so we had to determine what size we wanted the tray to be at. once we decided we then had to measure the aluminium and cut out the tray 
Step 2: we then cut out a wooden block as a template which we could use to form the tray around in order to create unity between our two trays.
Step 3: once these templates were cut out we places them in the vice and began to start hitting it with the appropriate hammer. Starting with the sides then moving onto the curves. 
Step 4: after this it was just about correcting any mistakes that were hit into the metal, and adjusting the corners so that they were correct.

Final product: 

Comments

Post a Comment

Popular posts from this blog

Assessment 3 Torus Tutorial

Image
This shape i found to be the most confusing shape that we needed to make. A torus is a three dimensional (3D) donut-shaped geometric shape.  One attempting to make a new shape or learn a new skill its always important to have a plan. This is the basic thinking that is needed. 1. How to create something efficiently in terms of amount of material needed and time needed. (Its important to set these variables straight aways as they will be your guide on your project) 2. Mark the sheet according to the shape your are trying to make. plan out where you want to stretch and where you want to shrink. any places your plan to  manipulate  should be marked. 3. Think about your work process and the end result. Metal on Metal never leaves for a good looking product at the end.  4. always ask for help or a second opinion. when working on a project for a long period of time it may be hard to stay focused on the important thinks. you may spend to much time on one thing mean you don't have t
Read more

The Blister

Image
This week saw an introduction into a new machine that we had not yet used which was the CNC Machine. This assisted in the making of the Blister The Process: Step 1: We began with the templates being cut out for us. then we had to pick what shape we wanted to create. Step 2: once we had picked what shape we wanted we then cut the aluminium into the appropriate size for the template. This was then squished between the two pieces that was cut out from the CNC machine. Then it was just a matter of hitting the aluminium into the void underneath. Previous week when using a metal hammer i realised that it leaves marks on the material so i tried wrapping a cloth around my hammer to reduce this Step 3: once i had created my blister i took it out of the template and then cut the excess material off, in order to just have the blister shape. once that was done it was just a matter of making it smooth and nice. Final:
Read more